Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

SRAM RED eTap AXS Rear Derailleur
$710.00
The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors and signals, improving speed in every way. - SRAM AXS enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately
SRAM XX1 Eagle AXS Rear Derailleur
$700.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
SRAM RED eTap Rear Derailleur
$670.00
The SRAM RED eTap rear derailleur executes shifts the instant you demand it, with military precision. Wirelessly. It’s easy to set up, clean in appearance and delightfully uncomplicated. Mechanical necessities such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - Compatible with SRAM RED eTap shift/brake controls - Max tooth size: short-cage - 28T; mid (WiFLi) cage - 32t - SRAM RED eTap shifting logic - Wireless connection via AIREA network for fast and clean installation - Exact Actuation provides precise gear selections - Designed to work with SRAM PowerGlide and PowerdomeX cassettes - Speeds: 11-speed - Weight: 239 grams (short cage with battery) - Outer Cage: Carbon - Compatibility: SRAM RED eTap, PowerdomeX & PowerGlide Cassette - Inner Cage: Carbon - Finish: Black - Pulleys: Ceramic - Pull: Exact Actuation
Garmin Vector 3S Single-Sensing Power Meter
$599.99
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
SRAM RED eTap AXS Shift-Brake Lever
$430.00
Award-winning eTap shift logic, now with the connectivity of AXS. The SRAM RED eTap shift-brake levers build on this foundation while integrating our newest technologies. And, it offers many personalizations, from shifting sequence to brake lever reach. - AXS enabled for easy personalization - Simple and intuitive eTap shift logic - Customizable fit with Reach Adjust - Two ports for Blips on each lever - Large SRAM eTap paddles provide positive controls for rider input - For use with mechanical rim brakes
SRAM RED eTap AXS Front Derailleur
$400.00
The SRAM RED eTap AXS front derailleur leverages our advancements with X-Range gearing. The derailleur design carves out space for wide rear-tire clearance, making it a perfect fit for modern riding. And the shifting is quick and precise. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new SRAM RED front chainring combinations - The most responsive, quick, and precise front shifting to date - Compatible with existing eTap batteries - Speeds: 2x12 - Front derailleur compatibility: Road-Yaw - Chainstay Angle: 61-66 degrees
SRAM Force eTap AXS Shift-Brake Lever
$355.00
Combining the tradition of mechanical rim brakes and the precision and efficiency of modern electronic shifting, SRAM Force eTap AXS shift-brake levers are fully wireless and fully personalizable. Classic is now new. - AXS enabled for easy personalization - Simple and intuitive eTap shift logic - Customizable fit with Reach Adjust - One port per side for Blips - Large SRAM eTap shift paddles provide positive controls for rider input - For use with mechanical rim brakes
SRAM XG-1290 12-Speed Cassette
$350.00
The workhorse of X-Range gearing, the SRAM RED XG-1290 cassette progresses fluidly and quickly through a wider range of gears. It's specifically designed for wireless electronic shifting and the one-piece design offers you the best in weight savings. - Updated design for smoother and faster shifting - More gradual gear progression between cogs—at least five one-tooth jumps—while still offering a wider range - 10-tooth start helps provide a wider gearing range - Designed to work with an XDR driver body - One-piece machined steel X-Dome design for weight savings - All Zipp wheels starting from 2012 are XDR ready - Version: D1 - 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26 - 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28 - 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33
Stages Cycling Gen 3 Stages Power L Ultegra 8000 Power Meter
$349.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8000 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 - Sizing Options: - Lengths: 165mm, 170mm, 172.5mm, 175mm Includes: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Shimano Ultegra R8060 TT/Triathlon Dual Control Lever
$170.99 - $347.99
Shimano Ultegra TT/Triathlon dual control lever. - Reduced drag through a more aerodynamic design - Eliminated the switch box of ST-6871 to make the design smaller and shorter - Intuitive shifting control - Keep firm when shifting - Single button on each side of the shift lever only works with Synchronized Shift - 2x11-speed - Average Weight: 138 g/pair
SRAM Force 22 Hydraulic Disc Brake & Brake Lever (Left)
$329.00
SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!
Profile Design Svet Zero Base Bar
$290.99
The super-aero 3:1 wing section on Profile's full carbon Svet Zero Base Bar slices through the wind quickly and smoothly. This base bar has ergonomically shaped brake extensions with 0-degrees of drop for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bars, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
Shimano Ultegra RD-X805 Di2 Rear Derailleur
$284.99
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t
Profile Design Prosvet Base Bar
$274.99
The deep aero wing section on Profile's full carbon Prosvet Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Prosvet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
Shimano Ultegra Crankset
$269.99
Low weight, efficiency, and speed: That's what Shimano's Ultegra Crankset brings to every ride. The proprietary four-arm design sheds grams and increases stiffness for more power straight to the road. Computer-designed chainrings with optimally placed ramps and pins are a revolution in front shifting with fast, smooth gear changes that set the standard. A wide range of gearing options and crank lengths offers you the opportunity to find the crank that suits your riding style.
LOOK Keo Blade Carbon Ceramic
$250.00
The ceramic bearing and famous Blade technology transfers 100% of your power input to the drivetrain, making the Keo Blade Carbon Ceramic pedals a great choice. With the wide, 700mm² contact area, your foot will become one with the pedal, as you become one with your bike. Why You'll Love It - Ride the same pedal as the greatest riders of the World Tour peloton - Adapt pedal tension to suit your requirements thanks to two included carbon blades (tension 12 and 16) - Simply the best power-to-weight ratio on the road pedal market today Specs: - Spindle material: Chromoly+ - Technology: Blade - Body material: Carbon - Platform area: 700mm² - Platform width: 67mm - Total stack height (pedal + cleat): 14.8mm (8.5 + 6.3mm) - Q Factor: 53mm - Retention: Serial installed in 12 + additional 16 / 20 sold separately - Cleats: KEO cleat - Blade: Carbon - Weight (single pedal): 110g - Weight (pair + cleats): 290g
Profile Design T3 Plus Carbon
$237.99
T3 Plus Carbon Aerobars with ergonomic drop-bend extensions allow for the widest variety of hand positions for individual comfort. The revised T3+ Carbon extension brings improved electronic and mechanical shifting cable management to this innovative wrist relief bend. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration an optional BTA bridge is available. Tech specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) - Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 229mm – 335mm (Center of Basebar to Tip) - Extension Length: 376mm - Extension Height: 66mm - Extension Angle: 40-degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 575g
Shimano Di2 Bar-End Shifters (2-button)
$118.99 - $237.99
Shimano's Di2 Bar-End Shifters are the ticket for time trial/triathlon bicycles running Shimano's Di2 electric-shifting components (sold separately). With a simple, light touch of the easily accessed buttons, you get instant, perfect gear changes every time.
Shimano 105 R7000 Dual Control Lever
$234.99
The Shimano 105 R7000 mechanical brake Dual Control Levers bring quick and intuitive shifting and confidant braking in an affordable package. Features - Redesigned internal shifting unit - Greater reach adjust range - Easier access to inner shift cable - Quick and intuitive rear shifting operation - Reliable performance in race conditions - Lighter front shifting when paired with FD-R7000
Shimano Ultegra R8050 Di2 Front Derailleur
$229.99
Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams
SRAM XG-1275 Eagle 12-Speed Cassette
$215.00
Ride anywhere with this wide range XG-1275 cassette—it always provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. X-GLIDE2 improves both inboard and outboard shifting, as well as chain retention. - Cassette Body Type: SRAM XD Cogs: - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
Shimano Ultegra R8000 Pedals
$199.99
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
Shimano Sora 9-speed Dual Control Levers
$89.99 - $189.99
Shimano's Sora Dual Control Levers offer smooth shifting and confident braking. The hoods are ergonomically contoured for a comfortable grip and easy access to shifting controls from any handlebar position. Top-view gear indicators ensure you know which gear you're in at all times.
SRAM Force XG-1270 12-speed Cassette
$185.00
Designed for the next generation of drivetrains—and the next generation of riders. The SRAM Force XG-1270 cassette is optimized for electronic shifting and features our X-Range gearing technology. Smooth, precise shifts, from 10T on up. - X-Range gearing gives you more range and a smoother gear progression, so you’re always in the right gear - MINI CLUSTER construction reduces weight and increases durability - Designed to work with an XDR driver body Cogs: - 10-26T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26 - 10-28T: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 24, 28 - 10-33T: 10, 11, 12, 13, 14, 15, 17, 19, 21, 24, 28, 33 - 10-36T: 10, 11, 12, 13, 15, 17, 19, 21, 24, 28, 32, 36
Fabric Scoop Pro
$180.00
Fabric's Scoop saddle is designed to provide flexibility and great ergonomic feel for all genres of cycling. Starting with their unique flexible base, vacuum bonded upper and custom design rail, the Fabric Scoop is proven to be the perfect balance of comfort, performance and simplicity. Available in three profiles and four specifications. Wide choice of colours & specification -The Scoop is versatile. A regular ‘Best in Test’ winner, it is available in a wide range of specifications and colours to suit the needs and budget of every kind of rider. 3 rider profiles -Choose the Scoop to suit. There are 3 profiles of Scoop saddle; Flat for a more aerodynamic riding position, Shallow for all-day performance and Radius for a more upright, comfort focused position. Durable & flexible -Our unique 3 part bonding process not only results in super comfort but also an easy to clean saddle with smooth lines and superb durability. - Width: 142mm - Length: 282mm - Base: Nylon-fibre matrix - Rail: Carbon-fibre 7mm x 9mm - Upper: Lightweight PU foam - Cover: Waterproof microfibre
Shimano XTR M9100 Pedals
$179.99
- Enhanced pedal-to-shoe contact area with mud-shedding profile - Wide bearing placement for rigidity and uniform load distribution - Slimmer, weight-optimized axle with 2 length options - Low platform height for pedaling stability - Lightweight, 310 g (11 oz.) per pair - Slimmer axle housing better sheds mud and debris - Binding Dual Sided - Cartridge axle - SM-SH51 Cleat included - Cleat retention adjuster - Offset binding - Sealed mechanism - Average weight: 310g (Short axle type), 314 g (Normal axle type) - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - 3 mm shorter axle available. 1.0 mm cleat spacer included
Shimano Ultegra R8000 Dual Control Levers
$167.99
Shimano Ultegra R8000 dual control levers. - Greater reach adjust range - Quick and intuitive rear shifting operation with redesigned internal shifting unit - Even lighter front shifting when paired with redesigned FD-R8000 - 2x11-speed - Model Number: ST-R8000 - Series: Ultegra - Shift Cable Casing: OT-SP41 - Shift Cable: Polymer coated - Average Weight: 220 grams
Profile Design Ozero Base Bar
$163.99
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
Profile Design Sonic Ergo 35a
$159.99
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Profile Design Sonic Ergo 50a
$159.99
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top-level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. - The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine-tune a riders position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 50a extensions offer a 50° ski bend shape. The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Page 1 of 7 Next page